Class 1 & 2 Headlamp Beam Tester - RS5000

MOT Equipment

DVSA approved for use in MOT testing stations. Integral fixed aiming screen. Internal analogue LUX meter for accurate light intensity measurements.

Suitable for all types of Motorcycles, cars and light commercial vehicles. Supplied complete with 3m of rails, instructions and certificate of DVSA approval.

£810.00
Excluding VAT
  • £972.00 including VAT

Quantity

 

Delivery will be applied at checkout.

 

Returns policy see our T&Cs (link below), or call 01832 741007

Product Details
MOT Equipment
16 other products in the same category:

Reference: MOT Equipment

Wheel Alignment Bars - WA5000

Part of the standard equipment required to carry out a Class 1 & 2 MOT inspection

Price £150.00
More
In stock

Reference: MOT Equipment

MOT Inspection stand with Technicians' Kit

The MOT stand is the perfect solution for all MOT test stations. The stand has a unique feature that allows almost any bike on the market today to be lifted via the swinging arm eliminating the costly time consuming efforts to removing the fairings. It gives unlimited access to the real wheel and swinging arm for all the MOT checks required. Comes with a...

Price £355.00
More
Last items in stock

Reference: Motorcycle MOT - Class 1 & 2

Motorcycle MOT Bay Package

Perhaps one of the most complex areas of a motorcycle workshop from a planning and application perspective. We simplify the whole process by drawing on many years of Motorcycle MOT installation experience, we offer the most advanced, widely used and reliable range of equipment. With more than 600 MOT installations completed, backing up our position as the...

Price £7,775.00
More
Last items in stock

Reference: CALL FOR BEST OUR PRICE

Extraction 'Y' piece for twin exhausts

Rugged and durable 'Y' piece for use with motorcycles with twin exhausts. Can also be used with single exhaust machines by closing off damper valve. Can be used with both fixed and mobile extraction units. Top quality crush-proof, heat resistant hose and funnels.

Price £375.00
More
Last items in stock

Brand: LV8

Super Titan - Accessory Kit - ST02KIT

For use with, the Super Titan Scissor Jack, acts as additional spacers and support for bikes without centre stands and extra low clearance.

Price £45.00
More
In stock

Reference: SUSPENSION TOOLS

Suspension Compression Service Tool E450SA

Front fork and rear spring compressor designed to work on most sport bikes and road racers with cartridge forks. Allows you to remove the spring safely and holds the fork / shock for general servicing. Standard issue in many MotoGP, WSB and BSB teams today. Comes with full set of adapters from 45mm – 87mm.

Price £530.00
More
Last items in stock

Compressor 150 litre (Honda) - C150P

From a portable, 50lt model through to industrial output silenced models, we offer a complete range of quality compressors at competitive prices. Sourced in the UK, this proven line of belt driven machines have been designed to meet the standards required of a busy workshop. Powered by heavy-duty electric motors, each model is manufactured to current...

Price £945.00
More
Last items in stock

Reference: Accessories

Wheel Spin Motor - RS202SPW

RS202 Motor option Optional motor for the RS202 allows you to power up the wheel to the required spin speed for a fast and accurate balance. The motor disengages allowing the wheel to spin free on its bearings with no vibration for a perfect balance. The motor can also be used as a brake to slow the wheel down after balancing due to its built-in magnetic...

Price £500.00
More
Last items in stock

Reference: MOT

Turning Plate - RP5000

A turn plate working on bearings for a smooth action and easy identification of steering defects.

Price £105.00
More
Last items in stock

Reference: MOT Accessories

MOTAP - MOT Ancillary Pack

MOT Ancillary Pack consisting; noticeboard, all signs (5 off), low voltage inspection lamp, tyre pressure gauge, tyre depth gauge, corrosion assessment tool and embossing stamp.

Price £325.00
More
In stock

Reference: Fume extraction

Fume Extraction Hose

100mm diameter quality crush-proof heat resistant hose  - price shown per meter. Please  note: there are many similar product that claim to perform to the required standard and fall short  - they should not been confused with this quality product.

Price £47.99
More
In stock

Low-noise Compressor (British made) QT200

From a portable, 50lt model through to industrial output silenced models, we offer a complete range of quality compressors at competitive prices. Sourced in the UK, this proven line of belt driven machines have been designed to meet the standards required of a busy workshop. Powered by heavy-duty electric motors, each model is manufactured to current...

Price £2,675.00
More
Last items in stock

Compressor 200 litre (UK made) - C200

From a portable, 50lt model through to industrial output silenced models, we offer a complete range of quality compressors at competitive prices. Sourced in the UK, this proven line of belt driven machines have been designed to meet the standards required of a busy workshop. Powered by heavy-duty electric motors, each model is manufactured to current...

Price £725.00
More
Last items in stock

Reference: Electric Vehicle Servicing

ISOL8 ELECTRIC NANO MOTORCYCLE LIFT - EN600GE8

Using the design of the low profile NANO electro hydraulic scissor lift as its base. This Electric Motorcycle workbench's deck, tool trays and gates are coated in a specially formulated compound which provides substantial electrical insulation plus resistance to solvents and scratching. Essential when servicing the latest Electric Vehicles. 600kg lifting...

Price £2,560.00
More
New stock arriving soon - Please call for availability

Reference: Electric Vehicle Servicing

ISOL8 ELECTRIC MOTORCYCLE LIFT - EG400CE8

Using the design of the EG electro hydraulic scissor lift as its base. This Electric Motorcycle workbench's deck, tool trays and gates are coated in a specially formulated compound which provides substantial electrical insulation plus resistance to solvents and scratching. Essential when servicing the latest Electric Vehicles. 600kg lifting capacity,...

Price £1,950.00
More
Last items in stock

Reference: Electric Vehicle Servicing

ISOL8 ELECTRIC MOTORCYCLE LIFT - EG800CE8

Using the design of the EG electro hydraulic scissor lift as its base. This Electric Motorcycle workbench's deck, tool trays and gates are coated in a specially formulated compound which provides substantial electrical insulation plus resistance to solvents and scratching. Essential when servicing the latest Electric Vehicles. 600kg lifting capacity,...

Price £2,540.00
More
New stock arriving soon - Please call for availability

Follow us on Facebook