Choosing the best motorcycle lift depends on several factors, such as the type of motorcycle you have, your budget, and the lift’s intended use. Here are some key considerations to keep in mind:

Weight capacity

The lift you choose should have a weight capacity that is higher than the weight of your motorcycle. Make sure you know the weight of your bike before purchasing a lift.

Type of lift

There are several types of lifts available, including hydraulic lifts, air lifts, and scissor lifts. Hydraulic lifts are the most common and are known for their stability, while air lifts are easier to maneuver. Scissor lifts are portable and compact.

Size of lift

The size of the lift should be appropriate for your motorcycle. You don’t want a lift that is too small or too large, as this can lead to stability issues.

Durability

Look for a lift that is made from high-quality materials and is built to last. You want a lift that can withstand the weight of your motorcycle and can handle frequent use.

Safety features

Make sure the lift you choose has safety features such as locking mechanisms and non-slip surfaces. This will help ensure that your motorcycle stays securely in place while you are working on it.

Value

Motorcycle lifts can range in price from a few hundred pounds to several thousand pounds. Consider your budget when choosing a lift, but keep in mind that investing in a high-quality lift can save you money in the long run.

Reviews

Finally, read reviews from other motorcycle enthusiasts to get an idea of the pros and cons of different lifts. This can help you make an informed decision and choose the best lift for your needs.

Research the web to find the leading suppliers witrh the most positive feedback and reputation – try here!

We found that the most expensive is not always the best, similarly you get what you pay for…

The suggestion that an investment in a electro hydraulic lift specifically for our ride-on mowers and quads was met by some as an extravagance.

Five months on and what a difference a scissor lift can make. We no longer stretch out routine maintenance. Now we simply ride on to our trusty FML1000 lift press the remote control to raise it to an optimum work height and get on with it. This workbench allows easy access to most parts, even the cutting deck can be accessed through a drop our section. with a variety of mowers to service, the large stable deck provides ample space to place tools and parts within comfortable reach.

• Lifts up to 1000kg / I ton
• Deck 1.3m wide by 2.3m long
• Lifting capability >95cm
• Cable operated remote control
• Two hydraulic rams
• Italian design and manufacture
• CE certified
• Makes working on capital equipment easier, safer, more efficient and technicians’ work less arduous.

While the cost of this robust piece of workshop equipment may have cost a bit more more than equivalents from the far east there is no comparison in quality. Also we have the peace of mind in being able to deal with a company that supports this and other lifts in the ground care range.

Win, win – my advice don’t wait too long to add one to your workshop!

Below is a link to another article that may be of interest
RIDE ON LAWN MOWER LIFTS AND MAINTENANCE

When you hear of mechanics spending their hard-earned cash on a Motorcycle Lift or piece of kit from the far east, only to be disappointed that the reality didn’t live up to their expectations. So, when investing in capital equipment wouldn’t you want know that spares and support are at the end of a UK-based phone? That the workbench has been designed with its final purpose in mind rather than as a by-product of the 4-wheeled market!

You need a platform for your or your customers’ pride and joy to be secure and easily accessible. You need to know that the design and components have been put together with motorbikes in mind. 

So what are the important points you need to look out for 

• Robust construction
• Efficient space (scissor action) saving design
• Rear wheel drop out section 
• Smooth operation
• CE certification as a minimum
• Warranty backed by knowledgeable support and after sales service
• Proven products 
• Value for money

While this may not be upper most in your mind at point of purchase – quality consumables, after sales support, servicing, even an instruction manual that makes sense come into sharp focus when things go wrong.

When looking at the main differences between established manufacturers/brands and ones from the emerging markets you might be surprised where the cost cutting can occur. 

From the reliability of contact parts (especially wheel rim protection), to the winding of the electric motors to gauge of steel used in the casings of the machine, not to mention quality of seals and rams. 

It has been demonstrated that most European manufacturers apply rigorous tests and include correct compliance and certification this appears to be of less importance to some others. 

Motorcycle rims are expensive – why would you risk damaging any?

So, what makes the difference in a tyre changer and dedicated motorcycle tyre changer? Yes, you can find a range of machines from the far east and yes, you could save some money in the short term. 

What happens when you need to replace the parts that eventually wear. Will you have the ongoing supply of consumable parts, accessories and engineer servicing/repairs from a reputable supplier of workshop equipment.

The most popular tyre changers also offer labour saving accessories, for example; it’s worth looking at the addition of an assist arm that when used correctly allows the de-mounting and fitting of high specification tyres a breeze. More and more professional bike workshops are using this technology and specialist machinery to minimise risk and make the technicians’ tasks more efficient and profitable.

After talking to experienced service engineers who specialise in this area and when it comes to issues with cheaper machinery virtually all raise their eyebrows, sigh and respond to customers with;

• Cheap tyre changing machines are cheap for a reason…
• Generally we can’t get parts easily or quickly…
• You’ll need to contact the manufacturer…
• This is a car tyre changer that’s been adapted (poorly)…
• The (name of part) isn’t really up to the job long term…
• i don’t work on machines from…the part of the world…
• It’s a what?

One the most common issues we hear most is about (expensive) rim damage. Sometimes due to operator error, sometimes due to set up, poor build quality and little or no maintenance. When considering an important piece of equipment like this, set-up and basic training is vital as a minimum.

Given the choice would you prefer a machine dedicated to motorcycles that arrives ready to use over one that arrives in a crate and requires building, setting up and testing? Or a tyre machine that is professionally built, set up and has access to user training on call over a less than adequately written user manual to follow.

Ask yourself how many damaged rims or less than happy customers does it take to justify buying equipment that is tried and tested?

Don’t lose your customers, money or reputation!

When you can’t decide what equipment you may need or more importantly want, who better to ask than someone with professional experience.

Besides a heated garage with secure and easy access, if that’s not a contradiction. I have always wanted to be able to ride on to a workbench with out toppling off. I found that lift (EG600NANO), with an automatic wheel clamp, I don’t even need to put the bike on it’s stand.

I have my tyres fitted and wheels balanced at a local dealer and have always admired the ease with which they apply their trade. While I fully support local businesses, to be able to have access to a T520 Tyre Changer with the ProArm assist would be the dream. I have used a manual wheel balancing jig for years but again their motorcycle wheel balancer is quick and easy especially on my Duke’s single sided wheels.

All this being said – after a good ride all the washing; drying (GREAT TIP – I air dry all the nooks and crannies with an air gun off my mobile compressor) and polishing, my back does ache a bit so being able to lift my bike to the perfect height would be the biggest boon along with the fitted cabinets and workstation.

so will this cost me an arm and leg?

Surprisingly the price difference between good kit and not is not as great as you might think. Buying professional grade equipment that will last and is supported – in the long run is choice I would rather make. 

Now where’s the best place to start ?